APC ADSL 4-Port manual Access Control

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

Figure 1-35 : MAC Filtering (Bridge Filters)

5.6.18Access Control

Access control allows you to open the access from the Internet LAN to the following management ports of the DSL600ER:

•Telnet

•Web

•FTP

•TFTP

•Secure Shell (SSH)

•SNMP

Fig 1-36shows the default Access Control screen. The Access Control is disabled by default, remote management from the WAN side IP addresses is denied, most services from the LAN side IP addresses is enabled. Remember to :

1.Check Enable Access Control to enable this feature. (This will enable the IP Access List field)

2.You can select an IP from the IP Access List, or enter a new IP and check ADD

3.Change the LAN and / or WAN configurations of the IP address

4.Click Apply

ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 39 of 52