APC ADSL 4-Port manual Restore to Default, Security

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

5.6.24Restore to Default

The restore to factory defaults feature will set the ADSL Router to its factory default configuration by resetting the ADSL Router. You may need to place the ADSL Router into its factory defaults if the configuration is changed, you lose the ability to interface to the ADSL Router via the web interface, or following a software upgrade,. To reset the ADSL Router, simply press the reset button for about ~ 10 seconds. The ADSL Router will be reset to its factory defaults and after about 30 ~ 40 seconds the ADSL Router will become operational again.

A prompt as the one shown in Fig 1-42will pop-up.

Figure 1-42 : Restore to Default prompt

5.7Security

The security feature section allows users to configure the following:

•IP Filters

•LAN Isolation

•URL Filters

Figure 1-43 : Security

ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 45 of 52