ADSL
5.6.7Ethernet Switch Configuration
The IGMP Snooping prevents the switch from flooding the LAN ports with multicast frames, and will instead direct them to the CPU port for processing. Users are able to specify connection speed and set their values accordingly from the following available options. See Fig
•Auto
•10/Half Duplex
•10/Full Duplex
•100/Half Duplex
•100/Full Duplex
Figure
5.6.8Application (UPnP)
UPnP NAT and Firewall Traversal allow traffic to
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is configured, click Advanced and under Advanced, select UPnP. You must enable UPnP and then select which connection will utilize UPnP. In this case the PPPoA connection is enabled. See Fig
ADSL | Page 30 of 52 |