UNICOM Electric GST-2402 specifications Vlan Member Setup, Add Vlan Group

name is "Switch-A".

￿Broadcast Storm Filtering Control: enter “3” to change the value.

￿Load Factory Default Setting: enter “1” to set the switch configuration value to default value.

System interface

VLAN Member Setup

Configuring Port-Base VLAN group.

Add VLAN Group

1.Enter “E” to switch to Edit Mode.

2.Press “A” to start adding a VLAN group.

3.Use “L” and “J” to move to the port that you want to add into a VLAN group and use “space” key to mark the port.

4.When finished selecting VLAN members, press “ U” to update the VLAN table.

5.The VLAN group list will be displayed.