UNICOM Electric SmartPoE/802M specifications Standards, Back-plane Switching Fabric 5.6Gbps

Models: SmartPoE/802M

1 2
Download 2 pages 7.09 Kb
Page 2
Image 2
Standards:

SPECIFICATIONS

Standards:

IEEE 802.3 10Base-T Ethernet

 

IEEE 802.3u 100Base-TX

 

IEEE802.3ab 1000Base-T

 

IEEE802.3z Gigabit fiber

 

IEEE802.3x Flow Control and Back Pressure

 

IEEE802.3ad Port trunk with LACP

 

IEEE802.3af Power over Ethernet

 

Cisco Legacy PD

 

IEEE802.1d Spanning Tree/

 

IEEE802.1w Rapid Spanning Tree

 

IEEE802.1p Class of Service

 

IEEE802.1Q VLAN Tag

 

IEEE 802.1x User Authentication (Radius)

Connector

100Base-T:8x RJ-45 with auto MDI/MDI-X.

 

Ports 1~8 support POE inject function.

Packet throughput ability (Full-Duplex): 8.3Mpps @64bytes

Switch Architecture:

Back-plane (Switching Fabric): 5.6Gbps

MAC address:

8K MAC address table with Auto learning function

Packet Buffer:

1Mbit

Flash ROM:

4Mbytes

DRAM:

32Mbytes

LEDs:

System: Power (Green)

 

10/100TX Port: Link/Activity (Green), 100Mbps (Green),

 

Forwarding /Detect (Green).

 

Gigabit copper port: 1000/100Mbps (Green),

 

Link/Activity (Green)

 

Mini GBIC: Link/Activity (Green)

 

PoE: PWR FWD (Green)

Connectors:

2 x RJ-45 + 2 x 100/1000 SFP socket

 

POE pin assignment: RJ-45 ports #1 ~#8 support IEEE

 

802.3af End-point, Alternative B mode.

Per port feeding power: 20 Watts (maximum)

 

Positive (VCC+): RJ-45 pin 4, 5.

 

Negative (VCC-): RJ-45 pin 7, 8.

 

Data (1,2,3,6)

Power Supply:

AC 100 ~240V, 200 Watts (Max)

Redundant Power Supply: 48V DC

Power Consumption:

135 Watts (open issue)

Ventilation:

One DC Fan with fail detect function

Operating environment: 0˚~45˚, 5%~95% RH

Storage environment: -40˚~70˚, 95% RH

Dimension:

270mm (W) x 210mm (D) x 44mm (H)

EMI:

FCC Class A, CE

Safety:

UL, cUL, CE/EN60950-1

 

 

SOFTWARE FEATURES

 

Management:

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP MIB:

RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB,

 

RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643,

 

RFC 1757, RSTP MIB, Private MIB, PoE MIB

RFC standard:

Port Based VLAN

 

IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to

 

4K, VLAN ID can be assigned from 1 to 4096.)

 

GVRP (256 Groups)

SNMP Trap

1. Device cold start

 

2. Authentication failure

 

3. X-ring topology changed

 

4. Port Link up/Link down

 

5. DC disconnect trap-PoE port Event

Firmware Update

Supports TFTP firmware update, TFTP backup

 

and restore.

Port Trunk:

LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk

 

members

Spanning Tree: Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree

X-ring:Supports X-ring, Dual Homing, and Couple Ring

Provides redundant backup features and recovery time below 300ms

Quality of Service: The quality of service determined by port, Tag and IPv4 Type of service, IPv4/ IPv6Different Service

Class of Service: Supports IEEE802.1p class of service, per port provides 4 priority queues

IP Security: Supports up to 10 IP addresses permission to access the switch management and prevent unauthorized access.

Login Security: Supports IEEE802.1X Authentication/RADIUS

Flow Control: Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

IGMP:Supports IGMP snooping v1,v2

256 multicast groups and IGMP query

Port Security: Supports 100 entries of MAC address for static MAC and another 100 for MAC filter

Port Mirror: Supports 3 mirroring types: “RX, TX, and Both packets”

Bandwidth Control: Supports ingress packet filter and egress packet limit

The egress rate control supports all of packet types with limit rates of 100K~250Mbps

Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100k to 250Mbps

DHCP:Provides DHCP Client/ DHCP Server/ IP Relay functions

DNS:Provides DNS client feature and supports Primary and Secondary DNS servers.

SNTP:Supports SNTP to synchronize system clock via Internet

System log: Supports System log record and remote system log server

SMTP:Supports SMTP Server and 6 e-mail accounts for receiving event alert

Power testing: Features power supply testing function

Configuration upload

and download: Supports text format configuration file for easy system installation

Page 2
Image 2
UNICOM Electric SmartPoE/802M specifications Standards, Back-plane Switching Fabric 5.6Gbps