UNICOM Electric SmartPoE/802M specifications SmartPOE/802M, Feeds PoE to up to Eight devices

SmartPOE/802M

8 Port 10/100 Managed PoE Switch with 2 Gigabit Combo

Features

•System Interface/Performance

–RJ-45 port support Auto MDI/MDI-X Function

–Embedded 8-port PoE inject function

–Store-and-Forward Switching Architecture

–Back-plane (Switching Fabric): 5.6Gbps

–1Mbits Packet Buffer

–v8K MAC Address Table

•Spanning Tree

–Supports IEEE802.1d Spanning Tree

–Supports IEEE802.1w Rapid Spanning Tree

•VLAN

–Port Based VLAN

–Supports 802.1 Q TagVLAN

–GVRP

•X-ring

–X-ring, Dual Homing, and Couple Ring Topology

–Provides redundant backup feature and the recovery time below 300ms

•Port Trunk with LACP

•QoS (Quality of Service)

–Support IEEE 802.1p Class of Service,

–Per port provides 4 priority queues

–Port Base,Tag Base and Type of Service Priority

Feeds PoE to up to Eight devices!

8 Port 10/100 Managed PoE Switch with 2 Gigabit Combo

POE-63208T

802.3af

Compliant

PART NUMBER DESCRIPTION

POE-63208T 8 Port 10/100 Managed PoE Switch with 2 Gigabit Combo

•Bandwidth Control

–Ingress Packet Filter and Egress Rate Limit

–Broadcast/Multicast Packet Filter Control

•Port Mirror: Monitor traffic in switched networks

–TX Packet only,RX Packet only,Both of TX and RX Packet

•System Event Log

–System Log Server/Client

–SMTP e-mail Alert

•Security

–Port Security : MAC address entries/filter

–IP Security : IP address security management to prevent unauthorized intruder.

–Login Security: IEEE802.1X/RADIUS

The SmartPoE/802M is a multi-port switch that can be used to build high-performance switched workgroup networks. This switch is a store- and-forward device that offers low latency for high-speed networking and features a “store-and-forward “switching scheme. This allows the switch to auto-learn and store source addresses in an 8K-entry MAC address table.The SmartPoE/802M is targeted at workgroup, department or backbone computing environments.The SmartPoE/802M has eight auto-sensing 10/100Base-TX RJ-45 ports and all ports support the PoE injector function.The switch as two auto-detected Gigabit Combo ports for higher connection speed.

•SNMP Trap

–Device cold start, Authentication failure, X-ring topology changed, Port Link up/Link down, PoE port events

•IGMP with Query mode for Multi Media Application

•TFTP Firmware Update and System Configure Restore and Backup

SEE BACK FOR FULL SPECIFICATIONS

121807 Printed in U.S.A. UNILT121107

908 CanadaCourt

City of Industry,CA 91748 U.S.A.

Phone: 626.964.7873or 800.346.6668 Fax: 626.964.7880

www.unicomlink.com e-mail:info@unicomlink.com

©UNICOM 2007Specifications. UNICOM is a trademarksubjectof UNICOMto changeElectric, Incwithout. All rightsnoticereserved.