E-14
NOTE
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel
until the transmission ends, then resumes scanning after a 2
second delay period.
• When in the scan mode, the unit automatically activates
the Triple Watch feature. To deactivate Triple Watch from
the scanning mode, press and hold
16/9/TRI
for 2 seconds.
TRIPLE
disappears from the display.
Transmit
1. Transmission power can be set to
3.5 W (HIGH) or 1 W (LO).
Press

PWR h/l-loCk

to make the change.
The HIGH or LO indicator on the
displays accordingly.
2. To transmit, press and hold
PTT
(push-to-talk). TX appears on the
display.
3. To return to receive, release
PTT
. TX disappears.
NOTE
• If you press
PTT
for more than 3 minutes,
TX
starts blinking
and the transmission ends. The TX time out tone sounds
when you release
PTT
.
• If the battery indicator Level 0 is flashing when you press
PTT
, the radio will not transmit and the
TX
icon flashes. (see
page 7).
Turn On Keypad and Display Light
To light the keypad and the display simultaneously, press any key except
PTT
. Both the display and the keypad illuminate.
NOTE
If you press any key except
PTT
while the display and keypad
are illuminated, they remain illuminated for 10 seconds.
HIGH
US