Uniden 200 owner manual Transmitter

Microphone	Built-in Electret type
Display	Liquid Crystal Display
Speaker	16Ω, 0.2 W (Rated)
	AAA rechargeable Ni-MH batteries
Power Source	1.2V , 900 mAh x 6 (7.2 V)
	AAA alkaline batteries (optional)
	1.5V x 6 (9 V)
Size (without antenna)	4.5 (H) x 2.5 (W) x 1.22 (D) inch
	116 (H) x 63 (W) x 31 (D) mm
Weight	15.2 oz (430g) without antenna & batteries
Transmitter
Frequency Range	156~158 MHz
Frequency Tolerance	±0.5 PPM; ±2.5 PPM (maximum at 25°C)
Frequency Stability	±3 PPM; ±10 PPM (maximum)
Power Output	1.0 W & 3.5 W
Spurious Emissions	-36 dBc ( 1 W or 3.5 W); -18 dBm
Current Drain	650 mA (1 W), 1200 mA (3.5 W)
Receiver
Type	Double Conversion Super Heterodyne
	Phase Locked Loop system for Local Osc.
Frequency Range	156~164 MHz
Sensitivity	0.25 μV for 12 dB SINAD
Squelch Sensitivity	Threshold: 0.15 μV; 0.30 (maximum)
	Tight: 0.35 μV; 2.0 (maximum)
Audio Frequency Resp.	+6 dB @ 500 Hz
	-6 dB @ 2000 Hz
Adjacent Chan. Selectivity	79 dB @ ±25 kHz
Hum & Noise Ratio	53 dB (35 minutes)
Audio Output Power	0.16 W @10% THD
Current Drain	Squelched: 45 mA; Max. Audio: 160 mA

Specifications shown are typical and subject to change without notice.

E-17