Using the radio in scan mode, 08 10 11 12 | Uniden 270 guide

Using the radio in scan mode

xx To activate scan mode, press SCAN DUAL.

xx You must have at least two channels in memory to start a scan.

xx You cannot transmit while in scan mode.

xx To save a channel into memory, select the channel, then press and hold the L/M/H MEM key. The MEM icon displays whenever you tune to that channel.

xx To remove a channel from memory, set the radio to that channel, then press and hold the L/M/H MEM key. The MEM icon no longer displays.

xx When the radio stays on a channel, press Channel Up to leave that channel and resume scanning.

xx To end the scan, press the SCAN DUAL key again; the radio remains on the last scanned channel.

Scan mode with Weather Alert Watch

If you activate Weather Alert Watch while in scan mode, the radio checks the most recently-used weather channel every seven seconds, then continues scanning the next channel in memory:

Memory Channel Scan

08 10 11 12 13

Every few seconds, the radio checks the last-used weather channel, then scans the next channel.

14 15 17 20 24 25

WX Alert

Watch on wx

Scan mode with Triple Watch or Dual Watch

If you activate Triple Watch while operating in scan mode, the radio checks channels 9 and 16 every two seconds, then goes on to scan the next channel; with Dual Watch turned on, the radio only checks channel 16:

E-10	Uniden Atlantis 270 Radio Owner’s Manual

Image 14

Uniden 270 Using the radio in scan mode, Scan mode with Weather Alert Watch, Scan mode with Triple Watch or Dual Watch

Contents

Atlantis Making a Distress Call Speak slowly clearly calmly Faire un appel de détresse Parlez lentement clairement calmement Table of Contents Xx Transmitter power level select FeaturesXx Memory scan mode Introduction Waterproof Specifications Getting Started What’s included Back view Parts of the AtlantisFront view Charger Key Press to Press and hold to Reading the display Display icons and what they mean Watch mode What it does To turn it on/off Icon What it means Displays when Squelch mode is turned onMode What it does Use it when you To turn it on Want to Off How It Works Normal mode operation Normal mode with Weather Alert Watch Scan mode operation Normal mode with Triple Watch or Dual Watch Scan mode with Triple Watch or Dual Watch Using the radio in scan modeScan mode with Weather Alert Watch 08 10 11 12 Weather mode with Weather Alert Watch Weather modeUsing the radio in weather mode Weather mode with Triple Watch or Dual Watch Setting Up the HardwareInstall the Battery Pack Mounting the Charger Charging the BatteryImportant notes on charging the battery Changing the Volume Using Your RadioInstalling and Removing the Belt Clip Setting the Squelch Level Making a Transmission Boosting the transmission powerChanging the Channel Turning the Key Beep On and Off Setting Key LockSetting the UIC Channel Mode Saving a Channel to Memory Maintenance and TroubleshootingBattery Save Feature Scanning Channels in Memory Don’t use the charger when General Transmitter Receiver Channels and Frequencies MHzUS channel frequencies and names US Marine Channels RX Freq TX Freq Status Name US Marine Channels RX Freq TX Freq Status Name Canadian channel frequencies and names Canadian Marine Channels RX Freq TX Freq Status Name Canadian Marine Channels RX Freq TX Freq Status Name International channel frequencies and names International Marine Channels RX Freq TX Freq Status Name International Marine Channels RX Freq TX Freq Status Name Weather channel frequencies and names Channel Regulations and Safety Warnings Maritime Radio Services Operation Basic Radio Guidelines FCC/Industry Canada Information Body-Worn Operation Lithium Ion Battery Warning Three Year Limited Warranty Page QUESTIONS?