Problem |
| Things to Try | |
|
|
| |
The power LED on the | ambient temperature is below 41° | ||
F (5° C) or above 104° F (40° C). | |||
charger doesn’t turn | |||
on. |
| ||
| on the radio and charger are clean. | ||
|
| ||
|
| ||
|
| Make sure you are not in weather or | |
|
| scan mode. | |
|
| Make sure you are not trying to | |
|
| transmit on a | |
|
| or transmit at the wrong power level | |
The radio won’t | for this channel (see the channel | ||
transmit. |
| lists starting on page | |
|
| Check the battery power level; if it’s | |
|
| low, charge the battery before trying | |
|
| to transmit. | |
|
| Make sure the duration of each | |
|
| transmission is less than 5 minutes. | |
I can’t hear anything | Adjust the squelch level; it is | ||
from the speaker. | probably too high. | ||
Noise comes out of | Adjust the squelch level; it is | ||
the speaker all the | |||
probably too low. | |||
time |
| ||
|
| ||
I can transmit, but no | Check your UIC channel settings: | ||
does the area you are in use | |||
one can hear me. | |||
different channel assignments? | |||
|
| ||
I’m not getting hazard | Make sure Weather Alert Watch is | ||
alerts. |
| turned on. | |
|
| The channel number on the display | |
|
| will flash if the radio is in a watch | |
The display flashes, | mode or in scan mode. Try turning | ||
and I don’t know why. | off scanning, Weather Alert Watch, | ||
|
| Triple Watch, or Dual Watch (see | |
|
| page | |
|
|
| |
Uniden Atlantis 270 Radio Owner’s Manual |