If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.
Memory dialing from Talk Mode
1)Press 
.
“Talk” and the volume setting appear on the display.
If you set the ringer to off, “<Ringer
Off>” appears on the display.
2)press 
.
3)Enter a
The selected phone number is displayed. Then the number is dialed.
Chain Dialing
The 20 memory locations on the handset are not limited to phone numbers. You may want to store in memory a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
when you are prompted to enter the account number, simply press 
and then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a phone number. (Refer to “Storing Phone Numbers and Names” on page 21.) Enter a pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time between digits as they are sent.
