C. Connect the main base unit and charging
GETTING
cradle
RouteRoute thethe cordcordd..
1) Connect each AC adapter to the DC IN 9V jack and to each standard 120V AC wall outlet.
2) Set the main base and charging cradle on a desk or tabletop, and place one handset in
the main base unit and one in the charging cradle.
3) Make sure that the charge/in use and charge LED illuminate.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts.
• Connect each AC adapter to each continuous power supply.
• Place the main base unit and charging cradle close to the AC outlets so that you can unplug the AC adapters easily.
•After installing the battery packs in the handsets, charge your handsets at least 15- 20 hours before plugging into the phone line.
4)Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
If your telephone outlet isn't modular, contact your telephone company
for assistance.
Modular
•Use only the supplied
Do not use any other AC adapters.
•Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.
STARTED
www.uniden.com | G E T T I N G S TA R T E D [ 13 ] |
