
Press and hold Nfor approximately two seconds.
The display will temporarily go blank and then show the
standby display (see page 6).
Turning Your Pager Off
1.At the standby display, press Nto go the Function
menu (page 9).
2.Press >to select POWER OFF ().
3.Press Nagain and your pager is in the standby mode.
Low Battery WarningWhen battery power is low, this symbol ( ) appears in
the bottom center of the display, and – once every 30
minutes – a low beep sounds that lasts four seconds.
When this happens:
●Replacethe battery as soon as possible to prevent data loss.
●You will have to press Ntwice (instead of normally
pressing once) at the Standby display to go to the
Function menu (page 9).
4
NOTE
Thebuilt-in memory saver will store messages and
settingsfor approximately two minutes while you
changethe battery - or after the battery loses power.