Bank 6

 

Bank 7

 

Bank 8

 

Bank 9

Bank 10

51

 

61

 

71

 

81

 

91

 

52

 

62

 

72

 

82

 

92

 

53

 

63

 

73

 

83

 

93

 

54

 

64

 

74

 

84

 

94

 

55

 

65

 

75

 

85

 

95

 

56

 

66

 

76

 

86

 

96

 

57

 

67

 

77

 

87

 

97

 

58

 

68

 

78

 

88

 

98

 

59

 

69

 

79

 

89

 

99

 

60

 

70

 

80

 

90

 

100

 

Once you fill out the above chart, follow these steps to enter or change a frequency in a memory:

1.Press E/PGM to enter the program mode (the scanner turns on the PGM icon).

2.If the current channel is not the one you want to program, enter the memory number then press HOLD.

3.Enter the frequency including the decimal point, then press E/PGM.

4.To program the next memory, press or and repeat step 3. To program a different memory, repeat from step 2.

5.To exit program mode, press HOLD or SCAN or change the scanner’s mode.

Notes:

Any frequency you program replaces the previous memory contents.

If you enter a frequency you have already stored in a different memory in Step 3, the scanner beeps and displays the channel where you have previously stored the frequency. If you want to store the frequency anyway, press E/PGM a second time in Step 3.

To clear the contents of a memory, enter “0” in Step 3.

Channels you program are automatically unlocked (see “Locking/Unlocking Memories) and have Delay turned on (See “Setting Channel Delay”).

Selecting a Memory

To select a single memory to monitor, press HOLD. The scanner turns on the HOLD icon. Then, select a memory by pressing or to go to the memory or input the memory number then press HOLD.

Using the Scanner Memories

22

Page 22
Image 22
Uniden BC340CRS owner manual Selecting a Memory