Uniden BC796D, APCO 25 manual Setting Trunking Delay, Using I-Call Motorola and Edacs only

Models: BC796D APCO 25

1 84
Download 84 pages 18.79 Kb
Page 48
Image 48

Setting Trunking Delay

Setting a delay for trunking systems helps to ensure that you do not miss replies while scanning.

2:SCAN OPTION → 2:TRUNK → Select the bank → 4:DELAY

1:NONE

The delay is turned off.

2:1 SECOND

The delay time is 1 second.

3:2 SECONDS

The delay time is 2 seconds.

4:4 SECONDS

The delay time is 4 seconds.

5:INFINITE

When the scanner stops on a transmission, you must press RSM to resume searching.

6: -2 SECONDS

The scanner only stops on transmissions for 2 seconds, then automatically resumes. To hold on the transmission, press /HOLD during the 2-second pause.

7: -5 SECONDS

The scanner only stops on transmissions for 5 seconds, then automatically resumes. To hold on the transmission, press /HOLD during the 5-second pause.

8: -10 SECONDS

The scanner only stops on transmissions for 10 seconds, then automatically resumes. To hold on the transmission, press /HOLD during the 10-second pause.

Using I-Call (Motorola and EDACS only)

I-Calls are direct unit-to-unit transmissions that are not heard by other users. Your BC796D can monitor these transmissions in either the search mode or (if you have stored the unit number as a talkgroup) in the scan mode.

When the scanner stops on an I-Call, the scanner displays the individual radio unit ID instead of a talkgroup ID.

EDACS or Motorola Type 1

i nnnnn

Motorola Type 2

7 nnnnn

Note: • Each radio in a system has its own unique unit ID. Unit ID’s are not published for systems, and since officers might not use the same radio every day, it is difficult to predict who and what you will hear for a specific radio ID.

Since a conversation consists of two or more radios, and each radio has its own ID, if you hold on an I-Call, you will only hear one side of the conversation.

Turning I-Call On and Off for ID Search

2:SCAN OPTION → 2:TRUNK → Select the bank 9:I-CALL

1:ON

42

Page 48
Image 48
Uniden BC796D manual Setting Trunking Delay, Using I-Call Motorola and Edacs only, Turning I-Call On and Off for ID Search