113
Search and Close Call Options
Search and Close Call Options
The settings in this section affect custom searches, service searches, and Close
Call operation. The following table shows what options are available for various
search modes.
1 — Valid only for searching a range using Search with Scan.
2 — Valid only for storing a frequency from Search and Store.
3 — Valid only for storing a frequency from Service Search.

Managing Locked-Out Frequencies

While searching or during Close Call operation, if you press [L/O] while the
scanner is stopped on a frequency, that frequency is locked out of these modes.
The temporary Lockout frequency limit is 250. The permanent Lockout frequency
number limit is up to 250.
Setting Service
Search1Custom
Search1Quick
Search Search
and Store Close Call CC Auto
Store CC Hits
System
Freq. Lockouts ••••••
Broadcast
Screen • • • 2• •
CTCSS/DCS
Search ••••••
Repeater Find • • •
Max Auto Store • •
Set Delay Time •••
Set Modulation • • •
Set Attenuator • • •
Set Data Skip • • • 3•••
Set Step •
Set Record •••