To cancel speed dialing
If accessing the list when the phone is in standby, press [end] ([
] (play/stop) on the base).
If accessing the list during an active call, press [mem/menu] ([mem] on the base) to exit the list immediately. If no key is pressed for thirty seconds, the cordless handset or base will exit the speed dial list automatically.
Note: Pressing [end] on the handset or [
] (speaker) on the base to exit the speed dial list during a call will disconnect the call immediately.
Making a Call from the Caller ID List
You can place a call directly from the Caller ID list.
1) When the phone is in standby, press [
/cid] ([cid] on the base) in standby. Use [
] or [
] to select the phone number that you want to dial.
2) To have the phone dial a "1" before the displayed Caller ID number, press [1]. To have the phone dial the stored area code before the displayed Caller ID number, press [3].
3) Press [talk/flash] ([
] (speaker) on the base) or pick up the corded handset from the base. The displayed phone number dials automatically.
Note:
• From the base, you can also press [
] (speaker) or pick up the corded handset from the base before you access the Caller ID list. When you come to the phone number you want to dial, press [set].
• You cannot make a call from the Caller ID list if your phone is connected to a private branch exchange (PBX).
28
