Uniden DCX730 Series Compatible Bases Installing the Accessory Handset, Installing the Battery

Compatible Bases

This handset is compatible with Uniden's 2.4 GHz Digital Expandable phone system: the DCT736/DCT738 series, the DCT746/DCT748 series, the DCT756/DCT758 series, the DMX776/778 series, and the DCT646/DCT648 series. Visit www.uniden.com for the most up-to-date list of compatible bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See back cover page for contact information.

•Cordless Handset

•Charging Cradle

•AC Adapter, model # AD-0005 Input: 120V AC 60 Hz Output: 9V DC 210 mA

•Rechargeable NiMH Battery Pack, model # BT-1004 Capacity: 500 mAh, 3.6V

•Beltclip

•Printed Material

Installing the Battery

Follow the steps below to install the rechargeable battery pack.

1.Using the finger indentation, press in on the battery case cover and slide it down to remove it.

2.Plug the battery connector into the battery compartment jack. Be sure to match the red and black wires to the label near the jack.

3.Gently pull on the battery wires. If the battery connector comes loose, try connecting it again.

4.Replace the battery case cover and slide it up until it clicks into place.

Note: Use only the Uniden BT-1004 rechargeable battery pack supplied with your cordless telephone.

2