Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charger.
1.Connect the AC adapter to the DC IN
9V jack and to a
120V AC outlet that is not controlled by a wall switch.
Caution: Use only the Uniden
2. Set the charger on a desk or tabletop, and
place the handset in
the charger with the keypad facing forward.
3.Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts on the charging cradle.
4.Charge the handset battery pack for at least
Registering the Handset
You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.)
Note: The model number for your telephone base is located on the bottom of main base unit.
3