Uniden DCX 640 Step 3 Connect to Phone Line, TO SET LANGUAGE, Step 5 Setting Up the Answering System TO TURN THE ANSWERING SYSTEM ON/OFF, TO SET GREETING MESSAGE

[2] QUICK REFERENCE GUIDE
www.uniden.com
Step 3 Connect to Phone Line
When the handset battery pack
is fully charged after 15-20
hours of charging, plug the
telephone cord into the base
unit and then into a telephone
wall jack.
Your phone is set for tone
dialing. If your local network
requires pulse dialing, refer to
page 27.
Step 4 Setting Caller ID & Language Display Options
TO SET CALLER ID ON CALL WAITING AND CALL
WAITING DELUXE
For all Handset Menu Setup Options, refer to page 21.
Press menu/del in standby mode.
Press ring/vol/∧ or ring/vol/∨ to select
Global
Setup
and then select/.
Press ring/vol/∧ or ring/vol/∨ to select
CIDCW and
then select/.
Press ring/vol/∧ or ring/vol/∨ to select
CW On/CWDX
On
, CW On/CWDX Off , or CW Off/CWDX Off and
then select/. (See page 26 for details.)
TO SET LANGUAGE
Press menu/del in standby mode.
Press ring/vol/∧ or ring/vol/∨
to select
Handset Setup and
then select/.
Press ring/vol/∧ or ring/vol/∨
to select
Language and then
select/.
Press ring/vol/∨ to choose a
language and then select/.
Step 5 Setting Up the Answering System
TO TURN THE ANSWERING SYSTEM ON/OFF
Each time ans on/off is pressed, the answering machine
switches between on and off.
TO SET GREETING MESSAGE
Press and hold greeting
until voice prompt
“record greeting” plays.
Position yourself near the
base mic, and begin
recording your greeting.
When finished recording,
press greeting or play/stop.
Your greeting will playback
for confirmation.