[54] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
Setting the Time
Follow these steps to set the clock on the answering system to the correct time.
1) Press clock/MENU.
2) Press skip/SELECT or repeat/SELECT until the correct day is announced and the
corresponding number (from 1 Sunday to 7 Saturday) appears.
3) Press SET to select the day.
4) Press skip/SELECT or repeat/SELECT until you hear the correct hour setting.
The numbers 1 through 12 appear on the base as each hour is announced.
5) Press SET to select the hour.
6) Press skip/SELECT or repeat/SELECT until you hear the correct minute setting.
The numbers 00 through 59 appears on the base as each minute is announced.
7) Press SET to select the minute.
8) Press skip/SELECT or repeat/SELECT until you hear the correct AM or PM setting.
The message counter displays A or P.
9) Press SET to select the AM/PM setting.
A confirmation tone sounds, and the day and time you set are announced for your review.
Setting a PIN code
To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code ( - - ). To select a PIN code, perform the following steps:
1) Press clock/MENU twice. The current PIN code appears on the base and it is announced.
2) Press skip/SELECT or repeat/SELECT until the desired number appears. Press and hold
skip/SELECT or repeat/SELECT to quickly scroll through the numbers on the display.
3) Press SET to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
Time stamp will not be
heard until you have set
the time.
note
THE INTEGRATED
ANSWERING DEVICE