Using your phone
Make a call
1 Press 
the 
symbol is displayed. When you hear the dial tone, dial the number you want. The number is shown in the display. After a short delay the call timer will start timing the call.
2 Press 
to exit and return to standby.
Adjust the earpiece/speaker volume during a call
1 Press 
or 
to adjust the volume. There are six levels.
Make a call by pre-dialing
1In standby, enter the number to be dialed. The number is displayed.
You can enter numbers up to 24 digits long.
Press 
to delete any incorrect digits.
Press and hold 
to delete all digits.
2Press 
to dial the displayed number.
Handset range
If the handset is too far away from the base, during standby, Searching appears and the
symbol will flash. During a call you will hear a warning tone. You will need to mover closer to the base for clearer reception and to avoid being disconnected.
Call timer
When you make or receive a call, a short while after the line is connected the call timer will show the duration of the call in the display in hours, minutes and seconds. The call time will be displayed for a further 5 seconds after you end the call.
Handsfree
You can use handsfree to talk to your caller without holding the handset to your ear. You can speak into the handset microphone and listen over the loudspeaker.
Handsfree also enables other people in the room to listen in to the conversation.
[12]
