Uniden DECT1080 manual Battery Performance, Setting the date and time, Standby

Models: DECT1080

1 56
Download 56 pages 43.39 Kb
Page 7
Image 7

BATTERY LOW WARNING

If the symbol is displayed on the handset, CHARGE BATTERY appears and you hear the low battery tone, you will need to recharge your handset.

For optimum performance, be sure to return the handset to the cradle after each call. If the handset is left off of the base, the actual talk time duration will be reduced respective to the amount of time the handset is off the cradle.

Battery Performance

The handset may become warm during charging, this is normal. On a single charge your handset will give 16 hours talk time and 7 days standby time.

Over time, as the batteries wear out, the charge capacity will reduce, therefore, reducing the talk/standby time of the handset.

Eventually the battery pack will need to be replaced.

Setting the date and time

The phone uses the 24 hour clock.

In standby:

1Press .

2Press or until Time & Alarm is

displayed and press .

3Press or until Set Date&Time is

displayed and press .

4Enter Day, Month, and Year using the keypad,

e.g. 030605 for 3rd June 2005, and

press .

5Enter Hour and Minute using the keypad, and

press .

6Press to return to standby.

Connecting the telephone line cord

1Connect the telephone line cord into the TEL LINE jack on the back of the base.

Plug the other end into the telephone outlet. Setting up your phone is complete.

Now you can make and receive calls.

[6]

Page 7
Image 7
Uniden DECT1080 manual Battery Performance, Setting the date and time, Standby, Connecting the telephone line cord