Handset | Base | ||
1. | Remove the battery cover and disconnect | 1. | Disconnect the AC |
| the battery. |
| adapter to cut off |
2. | Let dry for at least 3 days with the battery |
| the power. |
| disconnected and the cover off for | 2. | Disconnect the |
| ventilation. |
| telephone cord. |
3. | After the handset dries, reconnect the | 3. | Let dry for at least |
| battery and replace the cover. Recharge the |
| 3 days before |
| battery fully |
| reconnecting. |
CAUTION! DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.
AC Adapter and Battery Information
•Use only the supplied AC adapters. Be sure to use the proper adapter for the base & any chargers.
•Do not place the power cord where it creates a trip hazard or where it could become
AC | Part number | ||
Input voltage | 120V AC, 60 Hz | ||
adapter | |||
Output voltage | 8V AC @ 300mA | ||
| |||
Battery | Part number | ||
pack | Capacity | 500mAh, 2.4V DC |
chafed and create a fire or electrical hazard.
•Do not place the unit in direct sunlight or subject it to high temperatures.
•Fully charged, the battery should provide about 10 hours of talk time and about 7 days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged.
•When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery alert, finish your conversation as quickly as possible and return the handset to the cradle. If the handset is in standby, none of the keys will operate.
•With normal use, the battery should last about one year. Replace the battery when the talk time becomes short even when the battery is charged. To buy a replacement battery, call the Parts Department listed on the front cover.
Rechargeable Nickel-Cadmium Battery Warning
•This equipment contains a rechargeable
15
