Getting started
Remove your Television carefully from the box. You may wish to store the packaging for future use.
In the box
Inside this package you should have:
•Television
•Remote control
•User guide
•AAA batteries x 2
Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead into the aerial socket on the rear of the TV.
Please Note |
| |
When not in use disconnect the plug |
| |
from the mains power supply. |
| |
Press the Power button on |
| |
the front of the TV. The |
| |
standby indicator will |
| |
illuminate. |
| |
Press a Numeric button or the |
| |
Program up or Program down |
| |
button on the remote handset or |
| |
Program up or Program down |
| |
button on the front panel to | 5 | |
switch the TV on. | ||
| ||
The standby indicator will dim. |
| |
The TV will come on after a few |
| |
seconds. |
| |
Press the Standby button on the |
| |
remote control to switch the |
| |
TV to standby. The standby |
| |
indicator will brighten. |
| |
Please Note |
|
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the quality of the reception may be reduced and adjustment of the aerial may be required when changing programs.
•Do not plug in any scart leads until you have tuned the TV in.
Please note
If you live in a poor reception area or use an indoor aerial you may experience loss or corruption of teletext transmissions.
Do not leave the television on standby unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections “TV controls” and “ Tuning the television”.
Battery fitting
Insert the 2 AAA Batteries supplied into the compartment on the rear of the remote control, ensure you follow the polarity diagram inside the compartment.
Switching on
Mains power
Connect the TV mains plug into your domestic mains socket outlet (230 V 50 Hz AC).
And switch on.
