Beko C7 manual Using the TV, Tuning the television, Manual tuning, Use the Program up/down buttons

Using the TV

Press the power button on the front of the TV.

The Stand-by indicator will illuminate.

Press a numeric button or Program up or Program down on the remote control or TV to switch the TV on from Stand-by?

The Stand-by indicator will dim and the

TV will come on after a few seconds.

Tuning the television

There are two ways of tuning your television:

8Manual, where you control the tuning process or

Autoprogram where the television does it all automatically.

Please Note

If the TV is set to a channel with no signal the TV will return to standby after 5 minutes. The time remaining is displayed on the screen the last 60 second will be displayed.

Manual tuning

Tuning the TV is accessed through the SETUP menu.

There are two ways to access the SETUP menu:

Press the blue FASTEXT button. or

Press the Menu button and use the Program down button to select SETUP. Press the OK button to enter the SETUP menu.

	SETUP
CHANNEL	S 07
SYSTEM	I
FINE TUNE	0
SEARCH	< >
AUTOPROGRAM	OFF
CHILD LOCK
PROGRAM NO	P1
STORE

C/S

BACK

Please note

The system I will be displayed automatically on SYSTEM row.

Please note

If you do not press any buttons for 15 seconds the TV will exit the menu system.

Note:

1.The TV is controlled by a menu system.

2.EACH menu has a use full prompt chart diagram attached.

3.Use the Program up/down buttons

to scroll throuh the menu headings.

4.Use the Volume +/- buttons to make any changes you want when the menu heading is highlighted in white.

5.A fuller explanation of each menu is given in this instruction book.

In the Setup menu select PROG NO and change to P1 using

the Program down button to select it and the Volume up button to change it.

Starting with Program 1, tune in the first channel as follows:

Use the Program down button to select SEARCH.

Press the Volume up or Volume down button to start the tuning search.

When the search finds a strong channel signal it will stop searching. The picture will appear.

Identify which channel you are watching (BBC 1, ITV 1 etc.) and decide which program number you want it to be. (e.g. BBCI = PI

BBC2 = P2 etc).

Use the Program down button to select PROGRAM NO.

Use the Volume up/downbuttons to select the program number.

Use the Program down button to select Store. Press theOKbutton and STORED will appear on the STORE line.

You have now stored the first channel.

Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.