Uniden DECT1588-3 manual Speaker during call screening

When you have this	Try...
problem...
	• Checking to see that there are not two handsets already using the conference
I can’t get two cordless	feature (see page 38).
handsets to talk to an	• Making sure another station is not in Privacy Mode (see page 40).
outside caller.	• Making sure both handsets are registered to and currently connected to the same
	base (see pages 14 and 15).
The answering system does	• Checking the AC adapter connection (see page 9).
not work.	• Checking to see if the answering system is turned on (see page 46).
	• The memory may be full. Delete some or all of the saved messages (see page
The answering system does	48).	Troubleshooting
not record any messages.	• Checking to see that the message record time is not set to announce only (see
	page 45).
The answering system
doesn’t say what time	• Checking to see if you have set the time (see page 23).
messages were recorded.
	• The incoming messages may be too long. Ask callers to leave a brief message.
Messages are incomplete.	• The memory may be full. Delete some or all of the saved messages (see page
	48).
I can’t hear base or handset	• Adjusting the speaker volume on the base or handset (see pages 36 and 37).
speaker during call screening
	• Checking to see if the call screen feature is set to on (see page 45).
or message playback.
I can’t access answering	• Checking to see if you are using the correct PIN number (see page 49).
system from a remote	• Checking to see if the touch-tone phone you’re using can transmit the tone for at
phone.	least two seconds. If it cannot, try using a different touch-tone phone.

57