RECEIVING A CALL
When a Handset receives an incoming call press .
The appropriate icon will remain illuminated for the duration of the call.
If the Handset is resting in the Base Station and the AutoTalk feature is enabled, simply
lifting the handset will connect the call.
CALL TRANSFER
If you have more than one handset registered on your Base Station, incoming external calls
can be transferred to another Handset.
After pressing to accept the call - inform the caller that you are about to transfer
the call:
Press then the number of the Handset to recieve the call.
When the other handset is answered you may speak to them first and then transfer the call
by pressing .
If the other handset does not answer, Press to return to the original caller.
An optional Dect handset is required for this feature.
CALL TRANSFER THROUGH A PABX
This telephone may not be compatible with all PABX Systems. Please contact your PABX
provider for information on transferring calls. However a common method of transferring
through a PABX is to press then the extension number you require followed by .
CALL WAITING / FLASH
If the call waiting tone sounds during a call:
Australia:Press then to switch between callers.
New Zealand:Press to switch between callers.
PAGE HANDSETS FROM THE BASE STATION
Pressing the Page key on the Base Station will cause all handsets to ring for 30 seconds.
This may be useful if you wish to locate a missing handset.
Pressing the Page button again, or pressing on a handset, will stop the paging signal.
If the Base Station Page key is pressed for longer than 4 seconds, the
Base Station will enter the registration mode.
BASIC ACTIVITIES
10
int
int
Dect 1805 Qk 2/26/02 10:12 AM Page 14