Uniden DECT 6015, DECT 6035 manual Registering the Handset, Resetting the Handset

Registering the Handset

You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.)

To register to a DECT 6000 series base, place the accessory handset in the base. While the handset is registering,

HANDSET REGISTERING appears in the LCD. When REGISTRATION COMPLETE is displayed, the handset has been registered to the base.

If REGISTRATION FAILED appears, pick up the handset from the base and try again.

1

Extra Handset	Charge the handset
	for 15-20 hours.
Charger

2

	Extra Handset
Place the extra handset
in the main base to
register.		Main Base
Registration		4
	Complete .
	Base #1
	Extra Handset
3	+
	Main Base	Charger

Resetting the Handset

If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.

1.Press and hold [ ] and [#] for at least five seconds, until the SYSTEM RESET menu appears.

2.Select the DEREGISTER HS submenu by pressing [Menu/Select]. WHICH HANDSET? appears in the display.

Which Handset?

Handset #1

Handset #2

3.Use [] or [] to select the handset ID to be de-registered from the list, and then press [Menu/Select]. DEREGISTER HS appears.

4.Press [] to move the cursor to YES, and then press [Menu/Select]. You will hear a confirmation tone.

4

DECT6005 OM.indd 4 20/8/07 1:49:20 PM