Uniden DS71 manual Call Waiting, For Australian Version, Talk to the second caller

The c.wait procedure toggles between the incoming and original call (vice versa).

The flash + 2 call waiting procedure toggles between the incoming and original call (and visa versa).

The flash + 1 procedure will drop the current call connection and pick up the incoming call on hold.

In New Zealand you must subscribe to Telecom’s Call Waiting Service before you can use this feature.

CALL WAITING

▼For Australian Version

Using the c.wait feature

Please call your local telephone service provider to check the availability of this service in your area.

1.While talking you hear the Call Waiting signal.

2.Press c.wait button.

3.The existing call is placed on hold.

c.wait

4.	Talk to the second caller.
5.	Press talk button to end the current call.
6.	The phone will ring back indicating
	that the first caller is still on hold.	flash

7.Press talk button to answer this call.

8.Press talk button to end the call.

Using the Flash Key

To access Telstra’s Call Waiting Service, you can either use the c.wait button or the flash key.

1.While talking you hear the Call Waiting signal.

2.Press flash then 2 to switch call and put the current call on hold.

3.To switch back to your original call, press flash then 1.

▼For New Zealand Version

Using the c.wait or flash key

1.While talking you hear the Call Waiting beep signal.

2.Press c.wait or the flash key. This feature sends a 600ms timed “hook-flash” on the telephone line for accessing services such as Call Waiting etc.

PAGE

To locate the handset when it is off the base, press page on the base. The handset beeps for about 15 seconds.

Press talk on the handset twice to stop the beeping.

	USING YOUR
21	PHONE