Use only the Uniden
B. Install the Rechargeable Battery Packs into the Handsets
Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle.
1)Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
2)Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
a click to insure connection.
3)Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.
4)Place the battery case cover back in the handset by sliding it upwards until it clicks into place.
[ 8 ] I N S TA L L I N G T H E P H O N E | www.uniden.com |