USING THE SPEED DIAL MEMORY[ 24] www.uniden.com
4)Enter a name according to the instructions below, then press the select/channel
key. If no name is required, go to step 5.
• The name can be up to 13 characters.
• Use the #/ and /tone/ keys to move the cursor to the desired location.
• Use the delete/transfer key to delete characters as needed.
• Press and hold the delete/transfer key to delete all the characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: upper case letters first, lower case letters next and finally the number
corresponding to the key.
If you make a mistake while entering a name
Use the /tone/ or #/ key to move the cursor to the incorrect character.
Press the delete/transfer key to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold the delete/transfer key.
Number of times key is pressed
keys 123456789
1
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRSpqrs7
TUVtuv8
WXYZwxyz9
*#-&()
(blank) 0
2abc
3def
4ghi
5jkl
6mno
7pqrs
8tuv
9wxyz
0
1
oper
For example, to enter Movies.
1) Press 6once. Then press the
#/ key to move the cursor to
the right.
2) Press 6six times.
3) Press 8six times.
4) Press 4six times.
5) Press 3five times.
6) Press 7eight times.
If the next character
uses the same number
key, you must press the
#/ key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.