Direct Wall Mounting | Uniden DXI665 guide

3.Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated.

4.Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch.

5.Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit.

RING VOL	PULSE-TONE DC IN 9V
OFF-LO-HI	TEL LINE

Note: Charge the Handset for 15-20 hours without interruption before plugging the phone line into your new phone. See page 24, Initial Battery Charging.

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following:

∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

∙Make sure the wall material is capable of supporting the weight of the Base Unit and Handset.

∙Use #10 screws with anchoring devices suitable for the wall material where the Base Unit will be placed.

14

Image 14

Uniden DXI665 important safety instructions Direct Wall Mounting

Contents

Contents Page Important Safety Instructions Battery Safety Precautions Privacy Features Introduction Included with the DXI665 Range Telephone Line ProblemsImportant Electrical Considerations Radio Interference More Than One Cordless Telephone Telephone Line Outlets InstallationSelecting a Location Connecting the Telephone Cords Applying Power to the Base Unit Desk or Tabletop Installation Wall Installation Standard Wall Plate Mounting Direct Wall Mounting 15/16 PULSE-TONE DC Setting the Handset Retainer Extending the Base Unit Antenna Setting Up Your PhoneInstalling the Handset Battery Pack Page Cleaning the Battery Contacts Charging the Battery Pack Initial Battery Charging Low Battery Indicator Continuous Battery Charging Setting the Pulse/Tone Switch Adjusting Ringer Controls Base Volume Controls Automatic Digital Code Security Area Code Entering the Local Area Code Setting Caller ID on Call Waiting 817 Setting the AutoTalk Feature Autotalk OFF ON-1 OFF-0 Autotalk OFF ON-1 OFF-0 Autotalk OFF ON-1OFF-0 Using Your DXI665 Handset Making Calls Calling Receiving Calls Using the Flash Key with Call Waiting Redialing the Last Number Called Using Caller ID Caller ID Display Viewing Calls in Memory Calling the Displayed Number Deleting Caller ID messages Entering a Number in Dial Memory Programming the DXI665 HandsetStoring a Caller ID memory number in Dial Memory NAME? Calling a Number Stored in Memory Editing and Deleting Numbers in Dial Memory Bob Jones Using the DXI665 Base Unit Making and Receiving Calls Using Mute, Flash, Page/Find Do the following What happens Programming the DXI665 Base Storing a Number Storing a Mixed Number Pause Erasing a Stored Number Dialing a Number Using the Base UnitChain Dialing Troubleshooting Problem Suggestion Specifications Base Unit One-Year Limited Warranty Page Precautions Base Unit Controls and Keys Page Covered under one or more of the following U.S. patents