Uniden DXI8560 Series manual Connect the Telephone Cord, Register the Accessory Handsets

Models: DXI8560 Series

1 12
Download 12 pages 35.81 Kb
Page 3
Image 3

8 Place one handset in the base and the other in the charging cradle.

Make sure that the /in use and LEDs illuminate.

What if the charge LED doesn't light up?

Check AC adapter connection.

Make sure you are not using an outlet that's controlled by a wall switch.

Note: For optimum battery life, charge all of your handsets completely before you connect the telephone cord. The first time you charge a new battery, allow 15 to 20 hours.

1-4. Connect the Telephone Cord

9

Connect the telephone cord to the

 

TEL LINE jack on the rear of the base.

 

10

Connect the telephone cord

To TEL LINE

 

to a telephone wall jack.

 

To telephone

wall jack

Telephone cord (supplied)

Note: If the telephone cord does not fit into your telephone wall jack, contact your local phone provider for assistance.

If you receive high-speed internet service through your telephone line (referred to as DSL), you should install a DSL filter between the telephone base and the wall jack. Standard telephones often can’t operate correctly without a DSL filter.

Test the connection

Telephone

wall jack

DSL filter

Telephone cord

11

Pick up the handset from the base and press [TALK/flash].

You should hear a dial tone, and the display should showTALK.

 

Talk

0:01

What if I can't hear a dial tone?

 

 

 

Check the telephone cord connection on the base.

 

 

 

What if the display doesn't show TALK?

 

 

 

Put the handset back in the base for at least five seconds.

 

 

 

Make sure the /in use LED flashes.

12

Make a quick test call, and then press [END] to hang up.

 

 

 

What if the call doesn't go through?

Check to see if your telephone provider uses pulse dialing. (See section 3-1 on System Options.)

What if there is a lot of static?

Check the sources of interference described in section 1-1 on Choosing the best location: is the base near any of those?

1-5. Register the Accessory Handsets

13

One by one, put each additional handset in the base.

The /in use LED should flash as the base recognizes the handset.

What if the /in use LED doesn't flash?

Pick the handset up and put it back in the base.

14

Wait at least five seconds, then pick up the handset and press

 

[TALK/flash]. Make sure you can get a dial tone on each handset.

1-6. Things to Remember

When you charge the handsets, the Caller ID summary screen and the name of the handset appear in the display.

Lots of people put HANDSET #1 in the base, but it doesn’t matter which handset you put in the base and which one you put in the charging cradle.

HS1

New :01

Total:17

Now your phone is ready to use!

1-7. Attach the Belt Clip

To attach the belt clip

Insert the tabs on the side of the belt clip into the holes on either side of the handset. Press the belt clip down until it clicks into place. (Tug on the clip to make sure it’s secure.)

To remove the belt clip

Gently pull the tabs out of the holes, then slide the belt clip off of the handset.

Page 3
Image 3
Uniden DXI8560 Series manual Connect the Telephone Cord, Register the Accessory Handsets, Things to Remember

DXI8560 Series specifications

The Uniden DXI8560 Series is an advanced cordless phone system designed to enhance communication while providing the best in terms of technology and user comfort. This series stands out due to its multi-functional features, making it suitable for both residential and office environments.

One of the key highlights of the DXI8560 Series is its impressive range, utilizing DECT 6.0 technology. This technology not only ensures clear and interference-free calls but also offers an extended coverage range compared to traditional cordless systems. With this enhanced range, users can enjoy seamless communication throughout their homes or offices without sacrificing call quality.

The DXI8560 Series boasts a sleek, modern design that fits well with contemporary decor. It features a large, backlit display that is easy to read, along with intuitive controls that allow users to navigate through various functions effortlessly. The illuminated keypad further enhances usability, especially in low-light conditions.

Another significant characteristic of the DXI8560 Series is its multifunctionality. The system usually comes with multiple handsets, allowing users to place the phones in different rooms for easy access. Additionally, it often includes features like call waiting, caller ID, and a digital answering machine with ample recording time to ensure users never miss an important call.

Enhanced voice clarity is another key trait of the DXI8560 Series, allowing for crystal-clear conversations. This is particularly significant for individuals who rely on their phones for business or professional communication, where clarity is paramount.

Moreover, the system is equipped with security features, such as encrypted call technology, which provides an added layer of privacy. Users can rest assured that their conversations are secure from eavesdropping.

The DXI8560 Series also offers customizable ringtones, allowing users to choose distinctive sounds for different contacts. This personalized touch enhances the overall user experience, making it easier to identify who is calling without needing to look at the screen.

In conclusion, the Uniden DXI8560 Series is a versatile and technologically advanced cordless phone system that focuses on user comfort, security, and convenience. Its range, clear call quality, multifunctionality, and modern design make it an excellent choice for those seeking a reliable communication tool. Whether for personal use or as part of a business, the DXI8560 Series is engineered to meet the demands of today's users while providing outstanding performance.