Uniden EXI4246 manual Connect the Base Unit and Charge the Handset, Use only the supplied

!

•Use only the supplied

AD-0001 AC adapter. Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

C. Connect the Base Unit and Charge the Handset

1)	Connect the AC adapter to the DC IN 9V jack and to
	a standard 120V AC wall outlet.	Route the cord.
2)	Place the handset in the base unit with the keypad
	facing forward.
3)	Make sure the charge/in use LED illuminates.
	If the LED does not illuminate, check to see that the AC
	adapter is plugged in and the handset makes good
	contact with the base charging contacts.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet to avoid long extension cords.

4) Charge your handset at least 15-20 hours before plugging the phone line.

5)Once the handset battery pack is fully charged, connect the telephone line cord to the TEL

LINE jack and a telephone outlet.
If your telephone outlet isn't modular, contact	Modular
your telephone company for assistance.

[ 1 0 ] I N S T A L L I N G T H E P H O N E w w w . u n i d e n . c o m