Included with Your Phone
• | Base | • | AC Adapter | • Rechargeable Battery |
• | Handset | • | Telephone Cord |
|
|
| Setting up the Phone | ||
|
|
|
| |
Do the following steps: |
|
|
| |
A. Choose the best location |
| C. Connect the base unit | ||
B. Install the battery pack |
| D. Choose the dialing mode | ||
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.
Here are some important guidelines you should consider:
Avoid heat sources, such as radiators, air ducts, and sunlight
Avoid television sets and other electronic equipment
Choose a central location
Avoid noise sources such as a window by a street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock
Avoid personal computers
Avoid other cordless telephones
•The location should be close to both a phone jack and a continuous power outlet which is not switchable.
•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.
•Be sure there is sufficient space to raise the base antenna to a vertical position.
•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
B. Install the battery pack
Charge the battery pack for at least
1) Press in on the battery cover release and slide the cover down until it comes off.
2) Connect the battery pack connector observing correct polarity (black and red wires) to the jack inside the battery compartment.
Do not exert any force on this connection. It could cause damage to the battery or handset. The plastic connector will fit together only one way. Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires.
3) Securely close the battery compartment cover by sliding it up until it snaps into place.
3
