Installing the handset battery pack
Charge the battery pack for 15 - 20 hours before you start using your phone.
Black
Red
SPDIGITAL
SP REA
ECTRAM D
900 | MHz |
status LED
1 Press the battery cover release.
2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.
3 Slide the battery cover forward until it snaps into place.
4 Place the handset on the base.
5 Make sure that the status
LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.
Use only Uniden Battery
9
