Battery replacement and handling, Power Failure | Uniden EXS 2060

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

37

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a dry cloth.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

Image 39

Uniden EXS 2060 manual Battery replacement and handling, Power Failure, When slightly dirty, When very dirty

Contents

Page Introduction to Your NEW Phone 28 29 Basics Telephone featuresCaller ID features Getting Started Base unit 5 to10 to11 About the digital security code Uniden Parts Department Choose the best location Connect the base unit If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone Pulse Standard wall plate mounting Direct wall plate mounting Preparing the battery pack Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contacts Dialing from standby ExampleOther Operations 1003 Dialing from talk modeTalk High Talk 017 AutoTalk when ringing Any key answer when ringingCall Waiting Ringer tone and volume Ringer on/off switchEarpiece volume Redial2 Redial3 Redial from standby High Redial from talk mode Memory Store Store NameEdit Memory07 Delete Memory07 Go Back Memory07 Stored Store Number Display a Programmed Number Memory dialing from standby Memory dialing from talk mode Talk Talk HighTalk 035 Store Number Memory Store is Memory01 Stored Down to Delete Memory Delete Memory02 Memory Store 01 Uniden Corp 02 John DOEEdit Memory02 Delete Memory02 Go Back Edit Memory02 Paging To locate the handset When phone is ringing When speaking on the handset To change your Caller ID options Setting Caller ID options 813-8 3300 11 1230PM 17 1230PM Uniden Corp New Total02 Delete Message? Yes When the pointer is at YesWhen the pointer is at No Deleting a Caller ID message Deleting all Caller ID name/numbers Delete All? YesTotal00 Long Distance call and Area Code setting Calling a party from the Caller ID listDial edit Long Distance call and Area Code setting Storing Caller ID messages in Memory dialingSelect Location 01 Uniden Corp 02 Jone DOE When a new incoming call arrives Additionalinformation To attach the beltclip To remove the beltclip Beltclip installation When very dirty Battery replacement and handlingPower Failure When slightly dirty Symptom Suggestion Troubleshooting Your NEW Phone Please do not Return this Product to the Place of Purchase At Uniden, we’ll take care of you V, W, X, Y, Z J, K, L Memo