[ 9 ]
GETTING STARTED
GETTING STARTED
The plastic connectors will
fit together only one way.
Make sure the battery´s
connector is properly
aligned.
BB..IInnssttaalllliinngg tthhee HHaannddsseett BBaatttteerryy PPaacckk
CChhaarrggee tthhee bbaatttteerryy ppaacckk ffoorr 1155--2200 hhoouurrss bbeeffoorree
pplluuggggiinngg tthhee pphhoonnee lliinnee iinnttoo yyoouurr pphhoonnee..
11Press in on the batt ery cover release and slide the
cover down until it comes off.
22Connect the batte ry pack connector with the
correct polarity (black and red wires), then insert
the battery pack into the batter y compartment.
33Slide the batte ry cover forward until it snaps
into place.
44Place the handset on the base.
55Make su re that the “
ssttaattuuss
“ LED lights. If the LED
doesn´t light, check to see that the AC adapter is
plugged in and that the handset makes good
contact with the base charging cont acts.
Use only the Uniden Battery (BT-800) supplied with
your phone. Replacement batteries are also available
through the Uniden Parts Department (See page 7).
EXT1365 (ENG)-8/9 Final 8/13/01 10:56 Page 9