ADDITIONAL INFORMATION [ 49 ]
If the handset battery pack
is completely discharged or
the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time the
battery pack is charged.
Changing the Digital Security Code
The digital security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is not necessary.
The first time y ou charge your handset, the security code is automatically set.
(See page 6.)
In the rare situation that you suspect another cordless t elephone is using the
same security code, you can change the code.
11Remove the handset from the base unit.
Press and hold on the base.
22While the handset is emitting the paging
sound, replace the handset to the base unit.
The paging tone stops.
Leave the handset on the base for more than
3 seconds. A random, new security code is set.
ADDITIONALINFORMATION
EXT1365 (ENG)-8/9 Final 8/13/01 10:56 Page 49