Connecting Line Cords and AC Adaptor, Setting Time and Date

If using the AC Adaptor, Batteries are not required for normal operation.

Always ensure telephone cord is disconnected before opening the battery compartment door and installing batteries.

Connecting Line Cords and AC Adaptor

1.Plug one end of the supplied telephone cord into the telephone line socket located at the rear of the phone.

2.Plug the other end into the telephone line wall jack.

3.Plug the AC Adaptor lead into the power socket at the rear of the phone.

4.Plug AC Adaptor into a standard wall outlet and switch it on.

If you subscribe to a Caller ID Service, your time and date will automatically be set for you when you receive your first call to this unit.

1.	Press and hold		FLASH , display shows SET TIME.
2.	Use	and	to select the correct number, press DIAL to confirm and move
	to the next digit, HH:MM DD/MM.
3.	Press	DEL to exit.

Batteries may be used instead of the supplied AC Adaptor.

1.Remove the battery compartment cover.

2.Fit 4 x AAA alkaline batteries.

3. Replace the cover.

Based on ½ hour use per day, good alkaline batteries should last 2-3 months.

	Battery
4x AA Batteries	Compartment