Uniden GMR1058-2CK(4CK) manual Package Contents, Gmrs License, Install the Batteries

GMR1058-2CK(4CK)

•	Power Boost Button for	•	Battery Level Meter
	Maximum Range	•	Channel Monitor
• 15 GMRS / 7 FRS Channels		• Channel Scan
•	Up to 10 Mile Range*	•	Keypad Lock
•	5 Selectable Call Tone Alerts	•	Belt Clip
•	Backlit LCD Display	•	NiMH Battery Pack and
•	Roger Beep		Charger

•Key Beep on/off

•38 CTCSS Code

•Optional Headset Accessory

•Headset Jack

* Range may vary depending on environmental and/or topographical conditions.

GMR1058 RADIO

		14	21
1		15
		16	22
		17	23
		18
	8	19
2	9		24
			25
3	10	20
4	11
5	12		26
6	13
7		27

1	Antenna	15	Receive Indicator
2	PTT (Push-To-Talk) Button	16	Power Boost Indicator
3	Power boost Button	17	Call Indicator
4	Monitor Key	18	Scan Indicator
5	Call Key	19	Channel Indicator
6	Scan Key	20	CTCSS Indicator
7	Speaker	21	Transmit Indicator
8	Channel Key	22	Volume Setting Indicator
9	Headset Jack	23	VOX Indicator
10	Up Key	24	Keypad Lock Indicator
11	On/off/select Key	25	GMRS/FRS Indicator
12	Down Key	26	Charging Contacts
13	Microphone	27	Charging LED
14	Battery Level Meter

Congratulations on your purchase of the Uniden GMR1058-2CK(4CK) (General Mobile Radio Service) radios. These products are lightweight, palm-sized radios. Use them at sporting events to stay in contact with family and friends, hiking, skiing, outdoors, or in a neighborhood watch for vital communication. These compact, state-of-the- art devices are equipped with many features.

PACKAGE CONTENTS

Your package contains two(four) radios, this reference guide including the product registration card, two(four) Belt Clips, two(four) rechargeable NiMH battery packs(#BP38), two(four) AC adapters (#AD-0001), and two(four) recharging cradles(#RC6488). To order headsets, replacement batteries, or other accessories, visit our website at www.uniden.com or call 1-800-554-3988, Mon-Fri,

8 a.m. to 5 p.m. CST. Use only Uniden accessories.

•NiMH Battery Pack - #BP38

•Charging Cradle - #RC6488

•AC Adapter - #AD-0001

•Headset - #HS2467

GMRS LICENSE

The GMR1058-2CK(4CK) radio operates on the General Mobile Radio Service (GMRS) frequencies which require a Federal Communication Commission license to operate. For licensing information and application forms, visit the FCC online at: www.fcc.gov/wtb/uls or call the FCC hotline at 1-800-418-3676. If you have any questions you can contact the FCC direct at 1-888-225-5322.

No license is required for operation on channels 8-14 or operation on any channel in Canada.

INSTALL THE BATTERIES

Your GMR1058-2CK(4CK) radio uses the NiMH battery pack or 4 AAA alkaline batteries (not included). If alkaline batteries are used, we recommend using high quality alkaline batteries.

To install the Ni-MH battery pack:

1)Make sure your radio is OFF.

2)Remove the battery compartment door by pressing up the tab at the bottom of the compartment door allowing the door to be removed.

3)Install the NiMH battery pack into the battery

compartment. Be certain to follow the instruction written on the label on the battery pack. Installing the battery pack incorrectly will prevent the unit from operating.

4) Replace the battery compartment door.

BATTERY LEVEL AND

LOW BATTERY ALERT

This unit has a battery level meter on the display to indicate the status of the batteries. When the batteries in the unit are very low, the battery level

meter icon will flash. Replace the alkaline

batteries immediately or if you are using the NiMH battery pack, you must recharge the battery in order to continue using the radio.

Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden accessories specifically designated for this product.

USING THE CHARGING CRADLE

If you use the rechargeable NiMH battery pack, two(four) GMR1058 radios can be charged by using the charging cradles.

Make sure to turn the radio OFF before placing the radio in the charging cradle. Otherwise the battery level meter icon won’t indicate properly.

1)Connect the AC adapter (# AD-0001) to DC IN 9V jack and to a standard 120V AC wall outlet.

2)Set the charging cradle on the desk or tabletop, and place the radio in the charging cradles with the keypad facing forward.

3)Make sure that the LED illuminates. Charge the battery pack for 16 hours and remove the radio from the charging cradle after charge.

Note: The charge indicator LED will remain on as long as the radios are left in the charger.

USING THE RADIO

In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.

Turning the Radio On and Adjusting the Volume

1)Press and hold the sel/ key to turn the unit ON, and increase the speaker volume by pressing the ▲ key. To decrease the volume, press the ▼ key.

2)Press and hold the sel/ key again to turn the unit OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the buttons or keys (except for the PTT and Power boost button, and call key) are pressed. To turn this sound OFF, press and hold call key while turning ON the radio. Repeat this step to turn the sound ON.

Navigating through the Menu

To access the advanced features of the GMR1058- 2CK(4CK), your radio has a Menu function.

Normal CTCSS VOX Level Call Tone Key Lock Normal

OFF, 1-38 OFF, 1-3 1-5 OFF-ON

1)To enter the Menu, press the sel/ key.

2)Additional presses of the sel/ key will advance you through the Menu until exiting to "Normal" operating mode.

3)Other methods of exiting the Menu function are:

a.Press and hold the sel/ key again.

b.Press buttons or keys (except ▲ and ▼ keys).

c.Wait 10 seconds until the unit automatically returns to “Normal” mode.

Choosing a Channel

Your radio has 22 channels and 38 CTCSS codes you can use to talk to others. In order to speak to someone, each of you must set to the same channel and CTCSS code.

To choose a channel:

With the radio in "Normal" mode press the ch key and press the ▲ or ▼ key to increase or decrease the channel number displayed.

Note: FRS Channels 8-14 have an expectancy range of up to 3 miles. GMRS channels 1-7, 15-22 have an expectancy range of up to 10 miles by pressing the Power boost button. You can know which GMRS or FRS channel is active by the icon. The icon indicates GMRS channel, and the icon indicates FRS channel.

Choosing a CTCSS Code

Each of the channels 1-22 may have any one of the codes, OFF or 1-38 selected. Code oF (OFF) indicates no CTCSS code selected and your radio can receive a signal regardless of the code settings of the transmitting radio.

1)Enter the Menu. The CTCSS code on the LCD display will appear.

2)Press the ▲ or ▼ key to increase or decrease the code number displayed. You can also select oF (OFF) at this stage.

3)Exit the Menu.

Talking on Your Radio

To talk to others using the radio:

1)Press and hold the PTT button and speak in a clear, normal voice about 2-3 inches away from the microphone. While you are transmitting, the icon will appear on the display. To avoid cutting off the first part of your transmission, pause slightly after pressing the PTT button before you start talking.

2)When you are finished speaking, release the PTT button. You can now receive incoming calls. While

receiving, the icon will appear on the display.

Note: When you press the Power boost button,

boost and icon appear on the display. The radio will transmit Maximum power when a GMRS channel is selected. After one minute past when the boost transmission is established, the transmission stops automatically, and you will hear a boost time out error tone.

Voice Operated Transmission

Your GMR1058-2CK(4CK) radio is equipped with a user selectable Voice Operated Transmitter (VOX) that can be used for automatic voice transmissions. The VOX feature is designed to be used with a headset with a microphone. Transmission is initiated by speaking into the remote microphone instead of pushing the PTT button.

To select the VOX level:

1)Enter the Menu. Advance through the Menu until the vox icon appears on the display. The current level (OFF, 1-3) will be indicated. Level oF (OFF) disables VOX, while levels (1-3) set the sensitivity of the VOX circuit.

2)Press either the ▲ or ▼ key to the desired VOX sensitivity level. Use level 1 for increased sensitivity to voice in normally quiet environments, and use a higher level to reduce undesired activation in very noisy environments.

3)Exit the Menu.

Transmitting a Call Tone

Your GMR1058-2CK(4CK) radio is equipped with 5 selectable call tones that will be transmitted when the call key is pressed.

To select a call tone:

1)Enter the Menu. Advance through the Menu until the call icon is shown on the display. The current call tone number (1-5) will be indicated.

2)Press the ▲ or ▼ key to increase or decrease the number to the desired call tone. Each tone will be heard through the speaker.

3)Exit the Menu.

To transmit the selected call tone, press the call key. The selected tone will automatically be transmitted for a fixed length of time.

Keypad Lock

To Lock the keypad:

1)Enter the Menu. Advance through the Menu until

the icon appears on the display. The current key Lock status oF (OFF) blinks on the display.

2)To switch the key Lock mode from OFF to ON, press the ▲ key.

3)To confirm the setting, press the sel/ key. The radio returns to the "Normal" mode.

Note: If you exit the setting mode by pressing other than the sel/ key, the key Lock setting will be set to OFF.

To Unlock the keypad:

1)Press and hold the sel/ key to turn the unit OFF.

2)Press and hold the sel/ key again to turn the unit ON. The keypad is unlocked.

Channel Scan Feature

Your GMR1058-2CK(4CK) radio has a channel Scan feature that allows you to easily Scan all 22 channels. When an active channel is detected, the unit will pause on that channel until the channel is clear. Then after a 2 second delay, the unit will continue scanning. Pressing the PTT or Power boost button while the Scan is paused on a channel will allow you to transmit on that channel.

To turn ON channel scanning:

Press scn key until the scan... icon is displayed. The channel number on the display will change as the radio rapidly cycles through the channels.

To turn OFF channel scanning:

Press the sel/ key, call key, scan key, PTT button or Power boost button.