Troubleshooting
If the OCEANUS does not perform to your expectations, try the suggestions listed below. If you cannot get satisfactory results, call the Uniden Customer Service Center at (800)
SYMPTOM | CAUSE | REMEDY |
Won’t power on. | No or low voltage. | Check for proper voltage |
|
| getting to the set. |
|
|
|
Reverts to Ch.16 | Low current or | Connect to a source of |
when Tx key is | voltage. | 12VDC that can supply at |
pressed. |
| least 4 Amps. |
|
|
|
When the PTT is | Bad mic element. | Send in for repair. |
pressed - Tx light |
|
|
comes on and |
|
|
another radio can |
|
|
hear a “click” but no |
|
|
audio is heard. |
|
|
|
|
|
While scanning the | A source of noise is | Eliminate the source of |
radio stops on a | nearby. | the noise or delete the |
particular channel all |
| channel from the |
of the time. |
| scanner. |
|
|
|
There is noise on | An external noise is | Either turn off the |
the receiver that the | being generated by | offending device or |
squelch will not | some device. | contact that Mfg. |
eliminate. |
| Regarding FCC part 15 |
|
| “unintentional radiator”. |
|
|
|
18
