5 | Install the Guides to the Case |
| |
A Install the top guide with 3 Type B screws. | Type B screws | ||
B | Install the side guides with 3 Type B screws | Top guide | |
|
| on each side. Install the center screw first on |
|
|
| both sides. |
|
NOTE: DO NOT drill a hole in the bottom of the pan. The air conditioner is designed to operate with the bottom of the pan approximately
Side guide
Type B screws
Safety Instructions Operating Instructions
6 | Measure, Cut and Install the Filler Panel | ||
A | Measure the height of the window opening | ||
| from the | top of the support platform. | |
|
| 3 | |
|
| Subtract 20 ⁄4 inches. Mark this measurement | |
on the filler panel and cut it evenly across.
Measure distance and
subtract 203⁄4 inches.
BInsert the uncut end of the filler panel into the top guide. Center the filler panel
Frame 
Filler
panel
Care and Cleaning Installation Instructions
CInsert the filler panel frame over the filler panel and into the side guides.
7
Attach the Side and Top Seals
ARemove the backing from the side seals and apply to the vertical inside face edges of the window frame and the sliding window that will rest against the air conditioner.
On casement window installations requiring a filler panel, one of the side seals should be applied to the inside face edge of the filler panel instead of to the window frame.
BPeel the backing from the top seal and apply to the top inside face edge of the window frame.
Top seal
Side seals
Troubleshooting Tips Consumer Support
11
