Read completely, then follow step-by-step.
Safety
1
Window Requirements
■These instructions are for a horizontal sliding or a casement window.
■The electrical outlet must be within reach of the power cord.
■For installation in a casement window, the window frame assembly and the side of the building must be adequate to support the weight of the air conditioner.
Instructions Operating
21″ min. |
|
40 1⁄2″ max. | 211/2″ min. |
| |
151⁄2″ | 151/2″ |
min. | min. |
| 161/2″ |
| max. |
Horizontal sliding window |
|
| Casement window |
| (See Casement Window Installation Instructions) |
Instructions Care and
2
Optional—Change the Power Cord Exit
You may change the power cord exit from the bottom to the side, if desired, for appearance or window sill clearance.
| Grasp both sides of |
|
A | Air filter | |
| the inlet grille and |
|
|
| |
| pull forward. The |
|
| inlet grill will pivot |
|
| forward and down to |
|
| reveal the air filter. |
|
DPull the grille frame with your thumb while pushing the case with your fingers. Lift the grille frame up and off.
Cleaning Installation Instructions
B | Remove the filter by |
|
| grasping it by the |
|
| frame and pulling | Inlet grille |
| it out. |
|
CIf present, remove both screws from the grille and retain.
Inlet grille
ERemove the right screw from the power cord clamp. (Replace screw into the empty hole in case the power cord exit ever needs to be reversed.)
FReplace the front grille frame and lead the power cord out the side.
GReplace the two screws (if removed earlier)and the filter, and close the inlet grille.
Right screw
Power cord
Troubleshooting Tips Consumer Support
9
