SYMPTOM | CAUSE | REMEDY |
You can not change the | You are on a channel | Change to an unrestricted |
transmit power setting. | which is limited to 1 | TX/RX channel. |
| watt transmit power |
|
| (e.g. Ch. 13) or you |
|
| are on a "receive |
|
| only" channel (e.g. |
|
| WX). |
|
|
|
|
The SCAN key does | CAUSE 1: No | REMEDY 1: Use the |
not start the scan | channels are in the | MEM/SCAN key to enter |
function. | scan memory. | desired channels into the |
| CAUSE 2: Squelch is | scan memory. |
| not adjusted correctly. | REMEDY 2: Adjust the |
|
| squelch to the point that |
|
| background noise just |
|
| disappears. |
|
|
|
You can hear | The transmit power is | Use the 1/2.5/5W key to |
transmissions, but the | set to low. | select a higher transmit |
other radio cannot hear |
| power setting. |
you. |
|
|
|
|
|
Uniden MHS450 Radio Owner’s Manual | 41 |
