Getting Started, Mounting the Charging Cradle

Getting Started

Mount the Charging Cradle to either a counter or wall.

To counter:

Attach the Charging Cradle using the mounting screws and washers as follows.

To wall:

Apply the Charging Cradle to the wall and insert the two mounting screws into the larger holes of the Charging Cradle.

Push down the Charging Cradle until it is firmly seated.

When you remove the Charging Cradle from the wall, loosen the screws and push the Charging Cradle up.

Apply the antenna to the radio as shown.

Be sure the antenna is firmly seated.

1 Place the rechargeable battery pack onto the

back of the radio. It will only fit in one way.

2 Snap the battery release clip until it clicks. Be sure the battery pack fits tightly against the body.