UC343FH 10/23/03 2:32 PM Page 4
Installation
MOBILE STATION INSTALLATION
Plan the location of the transceiver and microphone bracket before beginning installation.
1.Select a location that is convenient for operating the radio, but does not interfere with the driver or passenger.
2.Install bracket with
3.Connect wiring. (See instructions for Connecting the Power Cords.)
4.Attach the microphone bracket to the side of the radio.
5.Attach radio to bracket.
MOBILE STATION ANTENNA
Because the maximum power output of the transmitter is limited by the FCC, the quality of your antenna is very important. To achieve the maximum transmission distance, we strongly recommend that you install only a high quality antenna. You have just purchased a superior transceiver - don’t diminish its performance by installing an inferior antenna.
Only a properly matched antenna system will allow maximum power transfer from the 50 ohm transmission line to the radiating element.Your Uniden dealer is qualified to help you select the proper antenna for your requirements. A whip style antenna may be used for
automobile installation.
A short ‘loaded’ whip antenna is easier to install on an automobile. However, the efficiency of the short whip antenna is less than that of a full
MARINE INSTALLATION
Consult your dealer for information regarding marine installation. It is important to adequately ground the system and to prevent electrolysis between the fittings in the hull and the water.
4
