SPECIFICATIONS
Channels:
Frequency Range:
Frequency Control:
Frequency Tolerance:
Operating Temp.:
Microphone:
Input Voltage:
Current Drain:
Size:
Weight:
Antenna Connector:
LED Meter:
TRANSMITTER
40 AM
26.965 to 27.405 MHz
Phase Locked Loop (PLL}synthesizer
+0.005%
- 30°C to + 50°C
Plug in DIN type: Electret
13.8VDC nom. (+ or - ground} TX:full mod., 1.7A
RX.:with max audio output, 1.7A 4 '/l' W x 6 3/4"0 x 1 3/8"H
1 lb. 10 oz.
Indicates relative RF output and received signal strength
Power Output:
Modulation:
Freq. Response: Output Impedance:
RECEIVER
Sensitivity:
Selectivity:
Image Rejection:
I.F. Frequency:
RF Gain Control: Automatic Gain Control:
Squelch:
Audio Output Power:
Freq. Response:
Distortion:
Internal Speaker:
External Speaker:
PA System:
4 watts
A3E (Amplitude Modulation)
300 - 2500 Hz
50 ohms, unbalanced
0.5~V for 10dB; (S + N}/N typical (limit: 1.0 ~V} 6dB@ 7KHz, 70dB @ 10KHztypical
80 dB typical
Double Conversion Superheterodyne 1st 10.692 MHz
2nd 450 KHz
Adjustable for optimum reception
(AGC}:less than 10dB change in audio output for inputs from 10 to 50,000 microvolts
Adjustable; threshold less than 1 ~V 7 watts max. into 8 ohms
300 to 2000 Hz
less than 10% at 4 watts, 1000Hz 16 ohms, 3 watts round
(not supplied} 8 ohms
7 watts in external 8 ohm speaker
Specifications and features are subject to change without notice.
~
