Uniden PRO 640XL owner manual Pro 640XL Rear Panel

R1. ANTENNA CONNECTOR - This female connector permits connection of the transmission line cable male connector (Pl-259J to the transceiver.

R2. PUBLICADDRESS - An external 4 ohm 7-watt speaker must be connected to the "PASP"jack located on the back of the unit. The speaker must be directed away from the mic to prevent feedback.

R3. EXTERNAL SPEAKER - The "EXT.SP."jack is used for remote monitoring. The external speaker should have a 4 ohm impedance and be rated at least 7

watts. When an external speaker is connected, the internal speaker is disabled.

R4. POWERCONNECTOR - This connector allows you to connect the power to the PRO 640XL

with the power connecting cable.

Pro 640XL Rear Panel